Yes you can, simply by adding extra access control cards can you configure a 3 door, 5 door, 7 door and so on - you would simply 'loop' or 'daisy chain' the control cards
Can I use a card reader as an exit device in place of an exit button?
No, you can only use a card reader for access and an exit button for exiting
You supply only a 9 pin serial cable but I have a 25 pin serial connector, what do I do?
It's impossible to allow for all pc system configurations, with some having a 25 pin, some having a 9 pin and some having none at all, therefore we have left the 9 pin serial cable as standard and you would need to buy an adaptor for this - we would suggest a USB to 9 pin serial convertor which should be no more than £10
What cable distance can this run to?
We would suggest no more than 800mtr from reader to control board if using the RS232/485 adaptor that is supplied
What cable do I need?
It depends upon the distance you are installing the card reader from the control board, but we would suggest between 8 core and 12 core alarm cable
Does the control board and software monitor who enters the door/s and who exits the door/s?
No, it only monitors who enters the door/s