Access Control Kit 4 - With Proximity Card Reader

Access Control Kit 4 - With Proximity Card Reader Description:

Overview

Access Control Kit 4 is a key fob access control system with fail secure lock release, exit button, power supply and key fob door reader for standard fob access control requirements Access control for home, access control for office or any other access control solution required ** The fail secure lock release requires power to unlock, therefore it is not recommended for connection to a fire alarm as continued power to the lock release will cause irreparable damage to the lock release coil. Connection to a fire alarm would require a fail open lock release accompanied with a green emergency break switch which are an optional choice available when ordering this access control system Both fail secure & fail safe lock releases are compatible with a typical Yale or similar rim or mortice latch which you will require. They are not compatible with a deadlock locking device

Specifications

Connection drawings SR2-X manual Lock Release Lock style: Fail locked (Power required to un-lock) 12v ac/dc Coil impedance: 30 ohms Current consumption: 760ma - 900ma Holding force: 300kg Supplied with: Both mortice and surface mounted face plates Size: 160h x 25w x 31d mm Exit button Surface mounted plastic exit button Single gang surface mount Changeover contacts (C/NO/NC) Size: 85w x 85w mm SR2-X Proximity card reader Compact, weather resistant multi-function card reader that can be used as a self-contained programmable access control card reader providing proximity entry for up to 1000 users, (987 common users, 2 panic users, 10 visitor users & 1 x Authorized user) or as a standalone Wiegand output card reader for PC based access control systems PIN access is also possible via the remote control unit for the Administrator and all user data can be transferred from one unit to another within 3 minutes (Maximum connection is 9 units) Main features Manual and remote control programming Epoxy resin filled for enhanced weather protection ABS plastic body IP rating: IP66, weather resistant LED x 3 indication Colour: Black Voltage: 9-18v DC input Current: 40mA Reading range: 20mm - 60mm Card type: EM Wiegand or Mifare Classic cards and/or key fobs Card capacity: 1,000 Relay outputs: 1 x 2amp with N.C and N.O contacts Wiegand output: Yes Exit button input: Yes Cable tail size: 430 mm Fitting: Surface mount Unit size: 103h x 48w x 20d mm Remote control size: 85h x 32w x 5d mm A) All features are manual or remote programmable B) Non-volatile memory in the event of a power failure C) 3 x LED display indication status Power supply Ivory white cabinet (Small) Switch mode 13.8 volt dc regulated output 1amp power supply Additional battery charging output Battery deep discharge protection (Electronic) LED Indication for mains input, DC output & battery charge/low charge Multiple cable entry point Size of power supply: 225h x 195w x 75d mm

Video

DoorEntryOnline You Tube Channel Weather resistant, see our water test How to add a card or key fob How to delete a card or key fob How to reset all the SR2-X default settings. This does not delete the existing Master Add/Delete card, user cards or key fobs How to replace the Master Card. This does not delete existing user cards or key fobs {FAQ's}Is the lock release for external use? If in direct line of rain then no, the lock connections must be concealed to avoid weather damage Can I use the SR2-X card reader outside? Yes, it is IP66 rated and totally protected against dust and protection against heavy seas, or powerful jets of water Will the SR2-X card reader use any standard Wiegand RFID 125Khz or Mifare Classic 13.56Mhz card or key fob? Yes it can use either Do you program cards or key fobs via the SR2-X card reader? Yes, it's so simple to do. The SR2-X card reader is supplied with a Master Add/Delete card for this. It's also supplied with a remote control which is ideal for the deletion of lost or missing cards or fobs NB: It is advisable to make a note of the Unique ID (U.I.D) 10 digit number printed on the cards or fobs What happens if I lose the Master Add/Delete cards? Don't panic!, but you will need to reset the SR2-X card reader to replace them. You can use any cards or key fobs you like to create a new Master Add/Delete card. You will not lose any previously programmed cards or fobs by resetting the unit - The reset procedure is detailed within the online manual How do I delete cards or key fobs if I have lost them? You can delete cards or key fobs in two ways, the first is by physically having the card or key fob and use the Master Add/Delete card, or if you have lost the card or fob, you can use the remote control by entering the U.I.D 10 digit number Can I use two SR2-X card readers to access and exit a door? Yes if you wish, just buy an additional SR2-X Here If I wanted two SR2-X card readers, can I program the same card or key fob to activate both units? Yes, you can actually connect up to 9 x SR2-X's together and upload the user information from the first SR2-X to all additional SR2-X readers. Please refer to page 7 of the manual we have for download that will show you this Can I operate my automatic gate with this? Yes, please refer to the drawings we have for download that will show you this What cable do I need? You can use any cable you like for this, we suggest using 3 paired or 4 paired standard alarm cable that you can purchase from any local electrical or DIY store

Supplied With

1 x SR2-X card reader, Master Add/Delete card and remote control 10 x EM-RFID blue key fobs 1 x PB1 plastic exit button (surface mounted) 1 x Electric lock release (Fail locked, power required to un-lock) 1 x 12v dc power supply