Magnetic lock 10000

Magnetic lock 10000

Associated items also bought are:

power supply PSB 5amp - 24v
power supply PSB 5amp - 12v
Power supply PSB 3amp - 12v

Magnetic lock 10000

Total Price:28.96 (34.75 inc VAT)

12/24v dc Mini mortice magnetic lock 10000

Holding force: 272kg
Magnet weight: 1.253kg
Armature weight: 0.597kg

Suitable for: Mortice fitting for internal/external use** on uPVC, timber or metal doors

**External use when the magnetic lock wiring is fully concealed

Magnet Layout

Magnet Fitting Template

Understanding Magnetic Locks

Power input: 12/24v dc selectable via wiring connection
Holding force: 272kg (600lbs)
Current draw: 500ma @ 12v dc - 250ma @ 24v dc

Magnet size: 229l x 38w x 27d mm
Armature plate size: 185l x 38w x 12d mm
What is a magnet anti residual button?

Magnet holding force

Magnetic locks on double swing doors?

What is a Monitored magnet?

The magnet is running very warm, almost hot
'Power to Lock' devices such as magnetic locks can run warm as they require constant power to them, however, the most common causes of this are the magnet is 12v dc operation, but the power supply is 24v dc
Electrical resistance in the circuitry will create heat but if the power supply is providing insufficient amperage then the magnet will feel hot
Also, if there is a current drop because of a long cable run with an inadequate wire gauge, the magnet will not get sufficient current and will run hot

The armature plate is vibrating
This is due to either a faulty or under rated power supply, or the magnet is 24v dc operation and the power supply is 12v dc

The magnet does not lock, the door can be pulled open quite easily
The most common cause is incorrect alignment of the armature plate to the magnetic lock, a faulty or under rated power supply, or the magnet is 24v dc operation and the power supply is 12v dc

Armature plate alignment

Tech Tips
This magnetic lock will operate via 12v dc or 24v dc, however, please ensure you check the wiring connections correctly for use with a 12v dc power supply or 24v power supply before you turn the power on
If you fail to check this, then you run the risk of either the magnetic lock running very hot or it not locking correctly
Eventually you will cause damage to the system you have installed
Periodically clean the surface of both the magnet and armature plate with light oil
1 x Magnetic lock
1 x Armature plate
1 x Fixing kit

Recently viewed