Access Control Kit 18 - With Proximity Card Reader

Access Control Kit 18 - With Proximity Card Reader Description:

Overview

Access Control Kit 18 is a keypad access control system with magnetic lock release & bracket, exit button, emergency break switch with protective cover, power supply and dual PIN and/or key fob door reader for standard PIN/fob access control requirements Access control for home, access control for office or any other access control solution required

Specifications

Connection drawings Quick programming guide Keypad manual Magnet lock 'ZL' bracket installation Magnetic lock 12/24v dc surface mount slim line mini magnetic lock 600-S Power input: 12v/24v dc selectable via internal jumper links Holding force: 272kg (600lbs) Current draw: 500ma @ 12v dc - 250ma @ 24v dc Magnet size: 250l x 42w x 26d mm Armature plate size: 185l x 38w x 12d mm Break glass switch Surface mounted green emergency break glass reset switch with clear protective cover supplied with 1 x reset key Single pole with double output for C/NO/NC connections Size: 90h (To the lowest point) x 88w x 56d mm Exit button Surface mounted plastic exit button Single gang surface mount Changeover contacts (C/NO/NC) Size: 85w x 85w mm Digital keypad K401-IE 12v-24v DC fully featured self-contained high security digital keypad, proximity card and key fob reader manufactured from vandal resistant electroplated Zinc Alloy - ideal for internal or external use A cost effective '3 in 1' keypad with a huge specification providing PIN, key fob or PIN & key fob access 4 - 6 PIN with # Main features Rain hood: No, not required Input: 12v-24v DC input Current rating: 50ma IP rating: IP66, weather resistant and vandal resistant Keypad: Back - lit blue illuminated button keypad Back box: Vandal resistant electroplated Zinc Alloy with 900 mm cable tail User codes: 1000 User codes and/or key fobs or cards for relay 1 Card or key fob: The keypad uses standard EM-RFID proximity cards or key fobs Relay outputs: One, maximum relay output @ 3amp with N.C. & N.O. contacts Relay output timers: One from 1 second to 99 seconds Exit button input: Yes Fitting: Surface mount Size: 120h x 76w x 25d mm Cable tail size: 900 mm A) All features are keyboard programmable B) Non-volatile memory in the event of a power failure C) 3 LED display indication status Power supply Ivory white cabinet (Small) Switch mode 13.8 volt dc regulated output 1amp power supply Additional battery charging output Battery deep discharge protection (Electronic) LED Indication for mains input, DC output & battery charge/low charge Multiple cable entry point Size of power supply: 225h x 195w x 75d mm

Video

DoorEntryOnline You Tube Channel Weather resistant, see our water test How to add a user PIN How to add a key fob or card How to delete a user PIN, key fob or card How to change the Master code

FAQs

Can the keypad be installed outside? Yes, the keypad is IP66 rated for internal or external use Is the lock release for external use? If in direct line of rain then no, the lock connections must be concealed to avoid weather damage Is this system easy to install? This will depend upon your experience, however, it is not too difficult, neither is it difficult to program the keypad. There are drawings for this in the "Specification & Manual" tab Can I have two keypads, one for entering and one for exiting? Yes if you wish, just order an addtional keypad Here What cable do I need? You can use any cable you like for this, we suggest using 3 paired or 4 paired standard alarm cable that you can purchase from any local electrical or DIY store Tech Tips It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become "Sticky". This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item This magnetic lock will operate via 12v dc or 24v dc, however, please ensure you check the wiring connections correctly for use with a 12v dc power supply or 24v power supply before you turn the power on If you fail to check this, then you run the risk of either the magnetic lock running very hot or it not locking correctly Eventually you will cause damage to the system you have installed Periodically clean the surface of both the magnet and armature plate with light oil Armature plate alignment

Supplied With

1 x Magnetic lock release with adjustable ZL brackets (Fail open, power required to lock) 1 x Emergency break glass resettable switch with protection cover 1 x K401-IE digital keypad with up to 1000 user codes 10 x EM-RFID blue key fobs 1 x PB1 plastic exit button (Surface mounted) 1 x 12v dc power supply