Skip to product information
Access control kit 7
  • Access control kit 7
  • Access control kit 7
Access Control Kit 7

Access Control Kit 7

£102.49
£102.49
Ex VAT Shipping calculated at checkout.

Overview

Access Control Kit 7 is a keypad access control system with fail secure lock release, exit button, power supply and dual PIN and/or key fob door reader for standard PIN/fob access control requirements Access control for home, access control for office or any other access control solution required ** The fail secure lock release requires power to unlock, therefore it is not recommended for connection to a fire alarm as continued power to the lock release will cause irreparable damage to the lock release coil. Connection to a fire alarm would require a fail open lock release accompanied with a green emergency break switch which are an optional choice available when ordering this access control system Both fail secure & fail safe lock releases are compatible with a typical Yale or similar rim or mortice latch which you will require. They are not compatible with a deadlock locking device

Specifications

Connection drawings Quick programming guide Keypad manual Lock Release Lock style: Fail locked (Power required to un-lock) 12v ac/dc Coil impedance: 30 ohms Current consumption: 760ma - 900ma Holding force: 300kg Supplied with: Both mortice and surface mounted face plates Size: 160h x 25w x 31d mm Exit button Surface mounted plastic exit button Single gang surface mount Changeover contacts (C/NO/NC) Size: 85w x 85w mm Digital keypad K401-IE 12v-24v DC fully featured self-contained high security digital keypad, proximity card and key fob reader manufactured from vandal resistant electroplated Zinc Alloy - ideal for internal or external use A cost effective '3 in 1' keypad with a huge specification providing PIN, key fob or PIN & key fob access 4 - 6 PIN with # Main features Rain hood: No, not required Input: 12v-24v DC input Current rating: 50ma IP rating: IP66, weather resistant and vandal resistant Keypad: Back - lit blue illuminated button keypad Back box: Vandal resistant electroplated Zinc Alloy with 750 mm cable tail User codes: 1000 User codes and/or key fobs or cards for relay 1 Card or key fob: The keypad uses standard EM-RFID proximity cards or key fobs Relay outputs: One, maximum relay output @ 3amp with N.C. & N.O. contacts Relay output timers: One from 1 second to 99 seconds Exit button input: Yes Fitting: Surface mount Size: 120h x 76w x 25d mm Cable tail size: 900 mm A) All features are keyboard programmable B) Non-volatile memory in the event of a power failure C) 3 LED display indication status Power supply Ivory white cabinet (Small) Switch mode 13.8 volt dc regulated output 1amp power supply Additional battery charging output Battery deep discharge protection (Electronic) LED Indication for mains input, DC output & battery charge/low charge Multiple cable entry point Size of power supply: 225h x 195w x 75d mm

Video

DoorEntryOnline You Tube Channel Weather resistant, see our water test How to add a user PIN How to add a key fob or card How to delete a user PIN, key fob or card How to change the Master code

FAQs

Can the keypad be installed outside? Yes, the keypad is IP66 rated for internal or external use Is the lock release for external use? If in direct line of rain then no, the lock connections must be concealed to avoid weather damage Is this system easy to install? This will depend upon your experience, however, it is not too difficult, neither is it difficult to program the keypad. There are drawings for this in the "Specification & Manual" tab Can I have two keypads, one for entering and one for exiting? Yes if you wish, just order an addtional keypad Here What cable do I need? You can use any cable you like for this, we suggest using 3 paired or 4 paired standard alarm cable that you can purchase from any local electrical or DIY store Tech Tips It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become "Sticky". This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item

Supplied With

1 x Electric lock release (Fail locked, power required to un-lock) 1 x K401-IE digital keypad with up to 1000 user codes 1 x PB1 plastic exit button (surface mounted) 1 x 12v dc power supply

You may also like

Trusted by Trade

Your trusted partner in the UK security industry for over 16 years.

Quality Products

We offer a curated selection of leading brands and proven security solutions.

Fast Reliable Delivery

Enjoy fast dispatch and free UK delivery on eligible orders.

Dedicated Support

Our team is here to help you find the right solutions.