Complete AC7 Electronic Access Control System Kit

The Access Control Kit 7 is a comprehensive keypad access control system designed for standard PIN and/or key fob entry requirements. Ideal for homes, offices, or any other access control solution, this kit includes a fail-secure lock release, an exit button, a power supply, and a dual PIN/fob door reader.

Important Note on Lock Release: The fail-secure lock release requires power to unlock. Therefore, it is not recommended for connection to a fire alarm, as continuous power could cause irreparable damage to the lock release coil. For fire alarm integration, a fail-open lock release and a green emergency break switch are required (available as optional choices when ordering).

Both fail-secure and fail-safe lock releases are compatible with standard Yale-style rim or mortice latches (required, not included). They are not compatible with deadlock locking devices.

• 1 x Electric Lock Release (Fail-locked)
• 1 x K401-IE Digital Keypad (1,000 user capacity)
• 1 x PB1 Plastic Exit Button (Surface-mounted)
• 1 x 12V DC Power Supply

Manuals & Guides:

Connection Drawings
Quick Programming Guide
Keypad Manual

Lock Release:

Lock Style: Fail-locked (requires power to unlock)
Voltage: 12v AC/DC
Coil Impedance: 30 ohms
Current Consumption: 760mA - 900mA
Holding Force: 300kg
Included: Mortice and surface-mounted face plates
Size: 160h x 25w x 31d mm

Exit Button:

Type: Surface-mounted plastic exit button
Mounting: Single gang surface mount
Contacts: Changeover (C/NO/NC)
Size: 85w x 85w mm

Digital Keypad (Model K401-IE):

A '3-in-1' high-security digital keypad, proximity card, and key fob reader.
Construction: Vandal-resistant electroplated Zinc Alloy, suitable for internal or external use.
Power Input: 12v-24v DC
Current Rating: 50mA
IP Rating: IP66 (weather and vandal resistant)
Keypad: Backlit blue illuminated buttons
User Capacity: 1,000 user codes and/or key fobs/cards for relay 1
PIN Length: 4 - 6 digits
Card/Fob Type: Standard EM-RFID proximity cards or key fobs
Relay Outputs: One relay with N.C. & N.O. contacts (max 3A)
Relay Timers: Adjustable from 1 to 99 seconds
Exit Button Input: Yes
Fitting: Surface mount
Size: 120h x 76w x 25d mm
Features: All features are keyboard programmable; non-volatile memory retains data during power failure; 3-LED status display.

Power Supply:

Cabinet: Small, ivory white
Output: 13.8V DC regulated, 1A
Features: Switch-mode, additional battery charging output, electronic battery deep-discharge protection, LED indicators (mains, DC output, battery charge).
Size: 225h x 195w x 75d mm

Can the keypad be installed outside? Yes, the keypad is IP66 rated for both internal and external use.

Is the lock release suitable for external use? The lock connections must be protected from direct rain to avoid weather damage.

Is this system easy to install? Installation difficulty depends on your experience, but programming the keypad is straightforward. 

Can I use two keypads, one for entry and one for exit? Yes, you can order an additional keypad 

What cable do I need? Standard 3-pair or 4-pair alarm cable, available at any local electrical or DIY store, is recommended.

Tech Tip: Periodically clean the keypad fascia to prevent dirt build-up, which can cause the buttons to become "sticky." Regular maintenance will ensure long-lasting operation.